Brasfield-Gorrie Pelican for Colonial Pinnacle at Craft Farms of Gulf Shores, AL

6ft-Pelican 1stone-Front 6ft-Pelican_1stone-Front.JPG Pelican Paint Job: [1] clean & white primer. [2] basecoat. [3] Thick basecoat & dry overnite. [4] Dark color "stain" full strength and wiped back wet. [5] basecoat hilite semi-drybrushed. [6] Recomend additional light hilite drybrushed for maximum contrast.	Prototype3 6ft-Pelican Prototype3_6ft-Pelican.jpg	Prototype1 6ft-Pelican roughin Prototype1_6ft-Pelican_roughin.jpg	Prototype1 6ft-Pelican linedup Prototype1_6ft-Pelican_linedup.jpg
Prototype1 6ft-Pelican clay2 Prototype1_6ft-Pelican_clay2.jpg	Prototype1 6ft-Pelican clay Prototype1_6ft-Pelican_clay.jpg	Prototype1 6ft-Pelican clay-tailfeathers Prototype1_6ft-Pelican_clay-tailfeathers.jpg	Prototype1 6ft-Pelican clay-head Prototype1_6ft-Pelican_clay-head.jpg
Prototype1 6ft-Pelican clay-feet Prototype1_6ft-Pelican_clay-feet.jpg	Prototype1 6ft-Pelican carved Prototype1_6ft-Pelican_carved.jpg	Prototype1 6ft-Pelican carved-tailfeathers Prototype1_6ft-Pelican_carved-tailfeathers.jpg	Prototype1 6ft-Pelican carved-head Prototype1_6ft-Pelican_carved-head.jpg
Prototype1 6ft-Pelican carved-feet Prototype1_6ft-Pelican_carved-feet.jpg	Prototype1 6ft-Pelican carved-eye Prototype1_6ft-Pelican_carved-eye.jpg	Prototype1 6ft-Pelican AllReady RightSide Prototype1_6ft-Pelican_AllReady_RightSide.JPG	Prototype1 6ft-Pelican AllReady Pelican-Man Prototype1_6ft-Pelican_AllReady_Pelican-Man.JPG The Artist hanging out with the pelicans.
Prototype1 6ft-Pelican AllReady Head Prototype1_6ft-Pelican_AllReady_Head.JPG	Prototype1 6ft-Pelican AllReady Front Prototype1_6ft-Pelican_AllReady_Front.JPG	Prototype1 6ft-Pelican AllReady Feet Prototype1_6ft-Pelican_AllReady_Feet.JPG "The Sentinel" Copyright 2006 Chris Dixon	Prototype1 6ft-Pelican AllReady Eye Prototype1_6ft-Pelican_AllReady_Eye.JPG
Prototype1 6ft-Pelican AllReady Bust-details Prototype1_6ft-Pelican_AllReady_Bust-details.JPG	Prototype1 6ft-Pelican AllReady Back Prototype1_6ft-Pelican_AllReady_Back.JPG	Prototype1 6ft-Pelican AllReady 50ft-away2 Prototype1_6ft-Pelican_AllReady_50ft-away2.JPG	Prototype1 6ft-Pelican AllReady 50ft-away Prototype1_6ft-Pelican_AllReady_50ft-away.JPG
Prototype1 6ft-Pelican AllReady 2 Prototype1_6ft-Pelican_AllReady_2.JPG	Prototype1 6ft-Pelican AllReady Prototype1_6ft-Pelican_AllReady_.JPG	Final 6ft-Pelican 17B-lastoff Final_6ft-Pelican_17B-lastoff.jpg	Final 6ft-Pelican 0330 Final_6ft-Pelican_0330.jpg click then Use Enter key to view video..
Final 6ft-Pelican 0327 Final_6ft-Pelican_0327.jpg	Drawing3 6ft-Pelican platformbase Drawing3_6ft-Pelican_platformbase.jpg Width of base under tail is narrowed to approximately 1'-8-1/2". corners of bases are cut approx 2".	Delivery1-pelican-crane-360 Delivery1-pelican-crane-360.jpg click then Use Enter key to view video..	6ft-Pelican WhiteTintMan 6ft-Pelican_WhiteTintMan.jpg
6ft-Pelican WhiteTint 6ft-Pelican_WhiteTint.jpg	6ft-Pelican Cast ye-ha 6ft-Pelican_Cast_ye-ha.jpg 6' and 200 pound man is easily supported by this trusty steed. Tail section is just hovering and not necessary to support this jocky!	6ft-Pelican Cast Reinforced-steel-epoxy 6ft-Pelican_Cast_Reinforced-steel-epoxy.jpg 5/8 steel "S" from tip of beak down neck to base of tail; Double wire tied into 1/2 inch steel and threaded rods legs+tail rods. Each leg has 1 Stainless-Steel threaded rod and two 1/2 inch steel rods embedded into solid resin core. Resin is high-strength fiber reinforced, mineral filled epoxy.	6ft-Pelican Cast 1 6ft-Pelican_Cast_1.jpg Cast Pelican has titanium white tinting to block damaging Ultra-violet light from resin. "frosty" or powdered surface and mineral filled resin will readily accept a primer and then paints. Feet are supported by 2 @ 4x4" wood blocks bolted thru with 5 to 6 inches of stainless rod countersunk into bottom. These wooden "sled skis" should allow easy handling of this 450-500 pound monumental pelican sculpture.
6ft-Pelican 1stone-squared 6ft-Pelican_1stone-squared.JPG Approximate height is within 1/2" tolerances. this side is right on, other is about 1/4" higher. Smaller tail base and clearance arround foot base should allow room for best placement on building and platform.	6ft-Pelican 1stone-onehundred-ft 6ft-Pelican_1stone-onehundred-ft.JPG	6ft-Pelican 1stone-head2 6ft-Pelican_1stone-head2.JPG	6ft-Pelican 1stone-head 6ft-Pelican_1stone-head.JPG

Page 1 \| 2 \| Search Art Folder \|

Brasfield-Gorrie Pelican for Colonial Pinnacle at Craft Farms of Gulf Shores, AL

Ratings, Reviews and Comments: 》 ON! 《