epoxy-mix-00
epoxy-mix-00.jpg
|
epoxy-mix-01
epoxy-mix-01.jpg
#1. Measure 3 parts B [Base] to 1 part A [Activator]
IMPORTANT: Measure very accurate!
more "A" and it cures faster but not as hard.
more "B" and it cures slwer but hard.
too much "A" or "B" and it will NOT Cure!!!
|
epoxy-mix-02
epoxy-mix-02.jpg
|
epoxy-mix-03
epoxy-mix-03.jpg
#2. start mixing evenly: scruntch, twist..off to a good start!
|
epoxy-mix-05
epoxy-mix-05.jpg
#3. For smaller amounts: Roll in palm of hand using circular motion to mix, mix, mix..
|
epoxy-mix-06
epoxy-mix-06.jpg
#4. When you think you mixed enough mix little more! 2-5 minutes?
|
epoxy-mix-07
epoxy-mix-07.jpg
#5. Mixed! The epoxy clay should be an even color and consistancy. Who noticed the light streak? ..so go ahead and mix a little more!!! use 90% Isopropyle Alcohol to clean up! and very little to thin. Try a spray bottle top it works great to mist just enough evenly!
|
epoxy-mix-10
epoxy-mix-10.jpg
#6 For mixing larger batches pyramid on plastic covered tabletop to stack, scruntch, twist ..off to a good mixing start!
|
epoxy-mix-11
epoxy-mix-11.jpg
#7. ..hit heel of palm to slide pyramid smear across table..
|
epoxy-mix-14
epoxy-mix-14.jpg
#8. ..follow through to mix, repeat: roll up a pyramid, heal of palm, smear, follow through. You are a mixing ninja!!
|
epoxy-mix-15
epoxy-mix-15.jpg
#9. roll, palm, smear, mix and mix more!!
|
epoxy-mix-16
epoxy-mix-16.jpg
#10. Mixed! The epoxy clay should be an even color and consistancy. Any light streaks? ..if so go ahead and mix a little more!!! use 90% Isopropyle Alcohol to clean up! and very little to thin. Try a spray bottle top it works great to mist just enough evenly!
|
| |
| Search Art Folder |